Product Description
What is a Blind Spot in the Rearview Mirror?
The rearview mirrors on both sides of the car can only show the sides of the vehicle body, and they cannot fully gather all the information around the vehicle. Especially when merging from an auxiliary road onto the main road, if you can't observe vehicles in the left rearview mirror and then accelerate and make a large-angle cut into the inner lane, there is a high likelihood of colliding with vehicles that are driving at high speed in the inner lane.
Key Features
1,Blind Spot Monitoring
Turn on the car power and activate the blind spot monitoring function. The monitoring range is 4.4 meters horizontally on the side of the car and 10 meters behind the car. When a vehicle enters the monitored blind spot area, a warning prompt will be issued, and the warning will not be cancelled until the target object leaves the monitoring area.
(1)Level 1 warning: The yellow LED warning light is on.
(2)Level 2 warning: Turn on the turn signal, the buzzer beeps three times, and the red LED warning light flashes
2,Lane change warning (LCA)
During the driving process, the lane change warning function is continuously activated, The monitoring range is 4.4 meters horizontally on the side of the car and 10 meters behind the car. When the vehicle enters the monitoring blind spot, a warning prompt is issued until the target object leaves the monitoring area, and the warning is canceled. If the collision time with the vehicle behind the vehicle is less than 5 seconds within 50 meters, the system will issue a level one warning prompt.
(1)Level 1 warning: The yellow LED warning light is on.
(2)Level 2 warning: Turn on the turn signal, the buzzer beeps three times, and the red LED warning light flashes
3,Door opening warning (DOW)
After the car stops, activate the blind spot monitoring function. The distance behind the rear of the car is about 10 meters. When the vehicle enters the monitoring blind spot, a warning prompt will be issued until the target object leaves the monitoring area, and the warning will be canceled
(1)Level 1 warning: The yellow LED warning light is on.
(2)Level 2 warning: Turn on the turn signal, the buzzer beeps three times, and the red LED warning light flashes
4,Rear Cross Traffic Alert (RCTA)
When the reverse gear is engaged and a moving vehicle or pedestrian enters the monitoring area within 3-5 meters horizontally on the side of the car, a Level 1 warning is issued: the yellow LED warning light turns on. The warning will be canceled only after the target object leaves the monitoring area.
5,Active Overtaking Alert (AOA)
Monitors the surrounding environment in real time during overtaking, predicts potential collision risks, and warns the driver or automatically takes intervention measures to improve overtaking safety.
6,B-Pillar Blind Spot Vehicle Following at the Same Speed Warning
When it is detected that the vehicle in front of it and the vehicle traveling at the same speed have entered the blind zone of the B-pillar, and there is a potential collision hazard, the system will issue a timely warning signal to alert the driver, so that the driver can take appropriate measures to avoid the occurrence of a collision accident.
Product Parameters
Technical Specifications
| Parameter |
Specification |
| Working Voltage |
10-15v |
| Maximum Power Consumption |
5W |
| Operation Temperature |
-20~+80ºC |
| Working Current |
30-150mA |
| Standby Current |
0mA |
| Alarm Volume |
80dB |
| Function |
Model |
| A-Pillar Light Model |
24Ghz Millimeter Wave Radar |
77Ghz Millimeter Wave Radar |
79Ghz Millimeter Wave Radar |
| Radar Chip |
Single-Transmit Single-Receive |
Single-Transmit Single-Receive |
Dual-Transmit Quad-Receive |
Single-Transmit Quad-Receive |
| Number of Sensors |
2 |
2 |
2 |
1 |
| Indicator Light Color |
Dual-color (Red/Yellow) Warning Light |
Dual-color(Red/Yellow) Warning Light |
Dual-color(Red/Yellow) Warning Light |
Dual-color(Red/Yellow) Warning Light |
| Detection Range |
LCA 15meters |
LCA 15meters |
LCA:Max 50 meters BSD:10meters |
LCA:Max 70 meters BSD:10meters |
| Blind Spot Detection (BSD) |
√ |
√ |
√ |
√ |
| Lane Change Alert (LCA) |
X |
√ |
√ |
√ |
| Active Overtaking Alert (AOA) |
X |
X |
√ |
√ |
| B-Pillar Blind Zone Same-Speed Warning |
X |
X |
√ |
√ |
| Rear Cross Traffic Alert (RCTA) |
X |
√ |
√ |
√ |
| Third Lane Ignore |
√ |
√ |
√ |
√ |
| Door Open Warning (DOW) |
X |
√(4-Door Warning) |
√(4-Door Warning) |
√(4-Door Warning) |
| Installation |
Easy Installation |
Car-specific fitment (optional) Non-destructive installation |
Car-specific fitment (optional) Non-destructive installation |
Car-specific fitment (optional) Non-destructive installation |
Our Advantages
Product Advantages
1. Extensive detection coverage compensates for visual blind zones, significantly enhancing driving safety.
2. Using millimeter microwave radar technology, the accuracy can reach ± 0.1 meters, ensuring the accurate monitoring of the target by the system
3. Adapt to a variety of road conditions: Whether it is the high-speed driving scene of the expressway, or the low-speed driving situation of frequent starts and stops on urban roads and complex intersections, the BSM system can work stably and continue to play a monitoring and early warning role.
4. Strong stability:excellent anti-interference, high-quality electronic components and advanced manufacturing processes are used, and extreme weather can also be warned with 0 delays
5. Multi-level alarm system: provides visual (lighting) and audible (beeping) warnings according to the level of danger
6. Good compatibility: It can be widely adapted to various models, and some products also support personalized customization, providing exclusive driving safety solutions for each car owner.
Packaging & Shipping
Note: Accessories vary by version. For details, please contact customer service.
Company Profile
Huizhou BOTRS Electronics Co., Ltd. is a professional manufacturer of automotive products, including car cameras, reversing image systems, reversing camera systems, reversing radar, and car ambient lights.
With robust R&D capabilities and scientific production management, BOTRS has established a complete industrial chain covering:
- Research & Development;
- Cable production;
- Mold manufacturing;
- Injection molding;
- SMT (Surface Mount Technology);
- Post-solder processes;
- Product testing;
- Assembly;
- Sales and Distribution.
Our certifications include:
- ISO 9001:2004 Quality Management System;
- TS 16949:2009 Automotive Supply Chain Quality Management System;
- International standards: E8, FCC, E-MARK, FDA, CE, RoHS, EMS.
FAQ
Q1: Manufacturer or Trading Company?
A: We are a direct manufacturer with an in-house R&D team and professional production facilities.
Q2: What is your MOQ?
A: Our MOQ is flexible. Contact us with your project details for a customized solution.
Q3: Are samples available?
A: Yes. Please reach out to confirm sample costs and shipping arrangements.
Q4: Do you offer OEM/ODM services?
A: Yes, we do. Please let us know your specific customization requirements.
Q5: Do you offer distributor or bulk pricing?
A: Definitely. We welcome long-term partnerships; please contact us for our wholesale price list.
Q6: What is the lead time?
A: Generally 3-15 working days, depending on your order volume.
Q7: How is quality guaranteed?
A: We implement strict QC protocols and 100% pre-delivery testing to ensure peak performance.
Q8: What is the warranty?
A: All products come with a one-year warranty.
Q9: What are the shipping options?
A: We ship via major express carriers (DHL, FedEx, UPS, TNT), air freight, or sea freight.
Audited Supplier 
){kind=link}